HYBRID REVOLVER™
 

Rig Design Standards

  • API 4F – 2nd Edition
  • AISC – 9th Edition
  • AWS – 17th Edition
  • Area Classification – Class1 Div 1

Rig Design Standards

  • 6 hour rotating coiled tubing rig up time
  • 2 hour rig up / down time for top drive system
  • 137,000lbs axle weight
  • Load size (13’6”x 8’ 6”x 50’)

RRL 150 Injector Data

  • Max Speed – 140ft per minute
  • Max Pull – 150,000lbf (4500psi)
  • Max Snubbing – 60,000lbf (4500psi)
  • Auto Drill / Snub Capability (1” per hr)
  • Rotate from 1 – 20rpm clockwise or anticlockwise

BOP Accumulator

  • 7 1/16” x 5,000psi (NACE)
  • 5,000psi lubricator assembly
  • CT Stripper 5-1/8” Side door
  • Accumulator 121gal(US) capacity
  • 5,000psi air-over oil standby pump

Mast Assembly

  • 87ft height
  • 39ft working height with TDS installed
  • Rated to 275tons (550,000 pounds)
  • Hydraulically Operated
  • Transverses full rig floor (275tons)
  • Self Erecting (no cranes required)
  • Automatic braking system
  • 75,000lbs trailer axle weight
  • Load size (13’ 6”x 8’ 6”x 50’)

Reel Coil Capacity

  • 13,250ft 3.500” coiled tubing
  • 14,763ft 3.250” coiled tubing
  • 15,500ft 2.875” coiled tubing
  • 24,300ft 2.375” coiled tubing
  • 34,000 ft 2.000” coiled tubing
  • Automated Spooling System
  • CT E-line Manifold
  • Plug / Ball Dropping Manifold
  • 136,000lbs axle weight
  • Load Size (9’ 9”’x16’x 55’)

Gen Set / Power Unit

  • 450hp Hydraulic Unit
  • Class 1 Div 2
  • 2 x 15 – 320kW Generator Set
  • IR 25 hp Air Compressor
  • 65,000lbs axle weight
  • Load size (13’6” x 10’ x 48’)

Twin Pumping Unit

  • 2 x TFI BH-800 Triplex Single Acting Pump
  • 5,000psi maximum working pressure
  • Fluid ends PZ-8 interchangeable
  • Liner Size 4” – 7”
  • Discharge pressure range (5000psi – 1771psi)
  • Discharge flow range (246 – 743gpm)
  • 2 x 6”x5” C Boost pump
  • 62,000lbs axle weight
  • Load size (13’ 6” x 10’ x 43’)

Diesel Trailer

  • Diesel Tank 1,915gal (US)

Fluid System

  • Sweet /  Sour Operation
  • Trailerized 250bbl circulation system
  • Linear Shale Shaker
  • Degasser / Desander
  • 2 x 250bbl frac vessels

Control Cabin

  • Mounted on rig floor
  • Pressurized / Explosion proof  Class 1 Div 1
  • Medco DAQ / Data Package
  • Centralised Hydraulic and Electrical Control
  • A/C & Heat system

TESCO 250 HMI Top Drive

  • 475hp Hydraulic Unit
  • Class 1 Div 2
  • 250ton static load capacity
  • Quill ID 2-1/4”
  • 170 maximum rpm
  • 21,000ft-lbs max. drilling torque
  • 21,000ft-lbs max. make-up torque
  • 23,500ft-lbs max. breakout torque
  • Torque track
  • Control console mounted in main cabin
  • Dedicated hydraulic power pack
  • Grabber (back-up tong) 2-3/4” to 6-5/8” OD
  • Automatic pipe elevator
  • 2 x mast mounted counter balance winches
  • Link Tilt (35deg forward / 55deg backwards)
  • False Rotary Table and Work Platform
  • Dedicated Pipe Handling Trailer
  • Dedicated Pipe Handling Catwalk
  • Drilling with casing compatible
  • 2 hr rig up / down time
  • 75,000lbs axle weight
  • Load size (13’ 6”x 8’ 6”x 45’)

General Information

  • 3 personnel per shift (overbalance)
  • 5 personnel per shift (underbalance)
  • Site Office / Stores Module Trailer (13’ 6” x 8’ 6”x 45’)
  • Wi-Fi camera system
  • Fire Fighting Package
  • H2S and CH4 gas detection system
  • 2 x spare 75,000lbs axle weight  trailers
  • Total loads for Rig Package = 10 (overbalance)