STANDARD NON-ROTATING COILED TUBING UNITS
 

STANDARD NON-ROTATING COILED TUBING UNITS

Ver.1 Three Piece Offshore/ Land
  • Control Cabin / Power Pack
  • Tubing Reel Assembly
  • Injector w/ transport Skid

V3 Trailer mounted
(customer provided)

  • Control cabin
  • Power pack
  • Tubing reel Assembly
  • Injector
  • Drop Deck Style / Spread beam style
  • Walkways and Unitization
Ver.2 Four piece Offshore / Land
  • Control cabin
  • Power pack
  • Tubing reel Assembly
  • Injector w/ transport skid

Design Standards for all Model Types

  • AISC – 9th Edition
  • AWS – 17th Edition
  • IS0 9001 Standards

RRML 40 Injector Data

  • Max Pull – 40,000lbf (3000psi) Low Speed
  • Max Pull – 20,000lbf (3000psi) High Speed
  • Max Snubbing – 20,000lbf (1800psi)
  • Max Speed – 200ft per minute High Speed
  • Max Speed – 120ft per minute Low Speed
  • Auto Drill / Snub Capability (1” per hr)
  • Four Poclain motor design
  • Fail safe integral brakes
  • Floating traction design
  • Three Independent traction circuits
  • Single needle weight indicator
  • Protective Structural Steel  Lift frame
  • 1” through 2” coiled tubing

RRML 80 Injector Data

  • Max Pull – 80,000lbf (3000psi) Low Speed
  • Max Pull – 40,000lbf (3000psi) High Speed
  • Max Snubbing – 20,000lbf (1800psi)
  • Max Speed – 200ft per minute High Speed
  • Max Speed – 120ft per minute Low Speed
  • Auto Drill / Snub Capability (1” per hr)
  • Four Poclain motor design
  • Fail safe integral brakes
  • Floating centered traction design
  • Three Independent traction circuits
  • Single needle weight indicator
  • Protective Structural Steel Lift frame
  • 1” through 3-1/2” coiled tubing

Tubing Reel

  • Dual track Level wind system
  • Adjustable level wind arms
  • Motor gearbox c/w Failsafe brake
  • Protective chain guard
  • Integral transport chain lock
  • E-line Access
  • Internal shot off valve
  • Dual external plug valve
  • Single point lifting beam w/ slings
  • 10,000psi Swivel
  • RRML tubing counter
  • Easy Removable Reel core
  • Tubing capacity to meet customer needs

Power Unit

  • 450hp Hydraulic Unit
  • Electric Start
  • 200gal fuel reservoir
  • 14 SCFM Air Compressor
  • 30gal air reservoir
  • 150gal Hydraulic reservoir
  • Manual & remote engine controls
  • Skid mounted w/ drip pan
  • Forklift pockets
  • Protective Structural Steel Lift frame

Tubing Guide Arch

  • Three Clamp down Assemblies
  • 15 roller design
  • Lift chain
  • Support column to injector frame
  • Adjustable centering for even tubin feed

Power Hose Reel

  • 125ft Power hoses (Offshore)
  • 100ft Power hoses (Land)
  • Hydraulic controlled

Control Cabin Ver.1 (3 & 4 piece)

  • Telescopic
  • Offshore Protective Lift frame
  • Dual Access Doors w/ window
  • Control Console- complete operational controls
  • Front window 32 x 72”
  • Roof mounted AC w/ Heat  Strip
  • Captain Chair
  • Structural Steel Lift & protective frame

Control Cabin Ver.2 (Trailer)

  • Telescopic
  • Forklift pocket Lift frame
  • Dual Access Doors w/ window
  • Control Console- complete operational controls
  • Front window 32 x 72”
  • Roof mounted AC w/ Heat Strip
  • Captain Chair